Nikon COOLPIX P510 User Manual - Page 182

Flash Exp. Comp., Noise Reduction Filter, flash is too bright or too dark.

Page 182 highlights

Shooting Menu (j, k, l or m Mode) Flash Exp. Comp. Rotate the mode dial to j, k, l or m M d button M j, k, l or m tab (A13) M Flash exp. comp. Flash exp. comp. option is used to adjust the flash output. Use this option when the flash is too bright or too dark. Option Description +0.3 to +2.0 The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3 EV, to make the main subject of the frame appear brighter. 0.0 (default setting) The flash output is not adjusted. -0.3 to -2.0 The flash output is reduced from -0.3 to -2.0 EV, in increments of 1/3 EV, to prevent unwanted highlights or reflections. The icon for the current setting other than 0.0 is displayed on the monitor (A8). Noise Reduction Filter Rotate the mode dial to j, k, l or m M d button M j, k, l or m tab (A13) M Noise reduction filter Set the strength of the noise reduction function that is normally performed when recording the picture. Option Description e High Perform noise reduction at a level higher than the standard strength. M Normal (default setting) Perform noise reduction at the standard strength. l Low Perform noise reduction at a level lower than the standard strength. Noise reduction filter setting can be confirmed on the monitor when recording a picture (A8). Reference Section E52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260

E
52
Shooting Menu (
j
,
k
,
l
or
m
Mode)
Reference Section
Flash Exp. Comp.
Flash exp. comp. option is used to adjust the flash output. Use this option when the
flash is too bright or too dark.
The icon for the current setting other than
0.0
is displayed on the monitor (
A
8).
Noise Reduction Filter
Set the strength of the noise reduction function that is normally performed when
recording the picture.
Noise reduction filter setting can be confirmed on the monitor when recording a
picture (
A
8).
Rotate the mode dial to
j
,
k
,
l
or
m
M
d
button
M
j
,
k
,
l
or
m
tab (
A
13)
M
Flash exp. comp.
Option
Description
+0.3 to +2.0
The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3
EV, to make the main subject of the frame appear brighter.
0.0 (default
setting)
The flash output is not adjusted.
-0.3 to -2.0
The flash output is reduced from –0.3 to –2.0 EV, in increments of 1/3
EV, to prevent unwanted highlights or reflections.
Rotate the mode dial to
j
,
k
,
l
or
m
M
d
button
M
j
,
k
,
l
or
m
tab (
A
13
)
M
Noise reduction filter
Option
Description
e
High
Perform noise reduction at a level higher than the standard
strength.
M
Normal (default
setting)
Perform noise reduction at the standard strength.
l
Low
Perform noise reduction at a level lower than the standard
strength.