Nikon COOLPIX P510 User Manual - Page 202
Notes on Log Recording, To Erase Log Data, Select, and press the, button.
View all Nikon COOLPIX P510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
GPS Setting Menu 4 Select Save log, and press the k button. • The log data is saved to a memory card. End log Save log Erase log Reference Section B Notes on Log Recording • If the date and time are not set, the log cannot be recorded. • Use a fully charged battery to prevent the camera from turning off during log recording. When the battery power becomes exhausted, loge recording ends. • Log recording ends due to the operation below even when there is time remaining for log recording. - The USB cable is connected. - The battery-chamber/memory card slot cover is opened or closed. - Record GPS data in GPS options is set to Off (same as when Reset all is performed). - The setting of the internal clock (time zone or date and time) is changed. • If time for log recording still remains even when the camera is turned off, log recording is continuously performed until the preset time has elapsed. • The log data is temporarily stored in the camera. New logs cannot be recorded if the log data remains in the camera. After recording log data, save it to a memory card. • A maximum of 36 log data events can be recorded in one day. • A maximum of 100 log data events can be saved to a single memory card. C To Erase Log Data • To erase the log data that is temporarily stored in the camera, select Erase log in step 4. • To erase the log data that is stored in the memory card, press the l button in View log (E73). E72