Onkyo TX-RZ800 User Manual - Page 21
Quick Setup menu, En-21 - reset
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
WHOLE HOUSE MODE: If you press WHOLE HOUSE MODE while playback is being performed in the main room, the WHOLE HOUSE MODE is turned on, "Z2" and "Z3" on the display light at the same time and the playback sources of all the rooms are switched to the same source at once. ・ The sources that can be played in Zone 2 can be played in all rooms. ・ This function cannot be used if headphones are connected or audio is output from the speakers of the TV. 7 Quick Setup menu You can perform common settings on the television screen while playing. 1. Press Q on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. Quick Setup Listening Mode Audio HDMI Information MOVIE/TV MUSIC GAME THX BD/DVD 2. Select the items with the cursors on the remote controller and then press ENTER. ・ To return to the previous screen, press RETURN. 3. Select the content with the cursors of the remote controller. ˙ Listening Mode: Select the listening mode from the categories of "MOVIE/TV", "MUSIC", "GAME" and "THX". After selecting, press ENTER button to confirm. ・ It cannot be set when audio is played from the TV's speakers. ˙ Audio: You can perform various audio settings including audio quality and speaker level adjustment. ・ You cannot select this item when audio is output from the TV's speakers. Bass, Treble: Adjust volume of the front speaker. ・ It cannot be set if the listening mode is Pure Audio, Direct or THX. Phase Matching Bass: Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained. ・ It cannot be set if the listening mode is Pure Audio, Direct or THX. Center Level, Subwoofer Level: Adjust the speaker level while listening to the sound. The adjustment you made will be reset to the previous status when you turn the unit to standby mode. ・ Changes may not be possible depending on the speaker settings. ・ This setting is not possible during MUTING or when using headphones. Speaker Layout: Select the speakers to prioritize when back speakers and height speakers are connected at the same time. ・ Changes may not be possible depending on the speaker settings. A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. Different settings can be set for each input selector. ・ It cannot be set if the listening mode is Pure Audio or Direct. AccuEQ Room Calibration: Enable or disable the settings made by automatic speaker setting. If this is to be enabled, then normally you should select "On (All Ch)", and to disable just the front speakers you should select "On (ex. L/R)". The setting can be separately set to each input selector. ・ This setting cannot be selected if the automatic speaker setting has not been performed. ・ It cannot be set if headphones are connected or the listening mode is Pure Audio or Direct. Step 3: Playing Back Equalizer: Select "Preset1" to "Preset3" configured in "2. Speaker" - "Equalizer Settings" in the Setup menu. The same sound field setting is applied all ranges when set to "Off". ・ It cannot be set if the listening mode is Pure Audio or Direct. Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input selector. ・ The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream signals. ・ It cannot be set if the listening mode is Pure Audio or Direct. Late Night: Make small sounds to be easily heard. It is useful when you need to reduce the volume while watching a movie late night. You can enjoy the effect only with Dolby Digital, Dolby Digital Plus, Dolby TrueHD, and DTS sources. ・ Turning the unit to standby mode will set the setting to "Off". In case of Dolby TrueHD, the setting will be set to "Auto". ・ The setting cannot be used in the following cases. - If "3. Audio Adjust" - "Dolby" - "Loudness Management" in the Setup menu is set to "Off" when playing Dolby Digital Plus or Dolby TrueHD - When the input signal is DTS and "Dialog Control" is other than 0 dB Re-EQ, Re-EQ(THX): Adjust the soundtrack that was processed to enhance its treble, in order to make it suitable for home theater. ・ This function can be used in the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS-HD High Resolution Audio, DTS-HD Master Audio, and DTS Express. ・ In Re-EQ(THX), the following listening modes can be used: THX Cinema, THX Surround EX, and THX Select2 Cinema. En-21