Onkyo TX-RZ800 User Manual - Page 22
Other useful functions
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Center Spread: Adjust the width of the sound field of the front channel when playing in the Dolby Surround listening mode. To spread the width of the sound field to the left and right, set to "On". To concentrate sound in the center, set to "Off". ・ Depending on the speaker settings, this becomes "Off". Dialog Control: You can increase the dialog portion of the audio in 1 dB steps up to 6 dB so that you can make dialog easier to hear over background noise. ・ This cannot be set for content other than DTS:X. ・ The effect may not be selectable with some content. ˙ HDMI : HDMI OUT: Select the HDMI OUT jack to be used for output. Control TV: Set whether to enable the CEC link function for TVs connected through one of the HDMI OUT MAIN or SUB jacks. ˙ Information: Audio: Displays the audio input source, format, number of channels, sampling frequency, listening mode, and number of output channels. Video: Displays information such as the video input source, resolution, color space, color depth, 3D information, aspect ratio, and output. Tuner: Displays information such as the band, frequency, and preset number. This is displayed only when "TUNER" is selected as the input source. 8 Other useful functions To adjust the sound quality It is possible to enhance or moderate the bass and treble of front speakers. Press TONE on the main unit several times to select the desired setting from "Bass", "Treble" and "Phase Matching Bass", and turn the TONE dial to adjust. ・ This cannot be set if the listening mode is Pure Audio, En-22 Direct, or THX. "Bass": Allows you to enhance or moderate the bass. "Treble": Allows you to enhance or moderate the treble. "Phase Matching Bass": Allows you to keep the clear midrange and effectively enhance the bass. Checking the Input Format Press DISPLAY on the remote controller several times to switch the display of the main unit in order of: Input source & Listening mode Signal format & Sampling frequency (Audio) Input signal resolution (Video) ・ If "Dolby D 5.1" is displayed in Signal format, the Dolby Digital 5.1 ch signals are being input. When listening to AM/FM radio, the band, frequency and preset number are displayed. Playing Audio and Video from Separate Sources It is possible to play audio and video from different sources. For example, you can play audio from the CD player and video from the BD/DVD player. In this case, press BD/DVD on the remote controller and then CD. Then start playback on the BD/DVD player and CD player. This function is effective when an input with audio only has been selected (CD, NET, BLUETOOTH, TUNER, and PHONO in the initial setting). (Ú) * When NET or BLUETOOTH is selected, press either the NET or BLUETOOTH button then press MODE on the remote controller. Step 3: Playing Back