Onkyo TX-RZ800 User Manual - Page 91
Operating Other Components with the Remote Controller, Functions of REMOTE MODE Buttons
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Operating Other Components with the Remote Controller Functions of REMOTE MODE Buttons You can control any other device than this unit by programming a specified remote control code to a REMOTE MODE button of the remote controller. Register a remote control code to a desired REMOTE MODE button and press it to enter the remote mode that allows you to operate the corresponding device. ½½The RCV and ZONE2/ZONE3 buttons cannot be programmed. Operating Other Components with the Remote Controller Programming Remote Control Codes Searching in the Setup Menu You can search a remote control code and register it to a desired REMOTE MODE button in the unit's Setup menu. 1. After pressing RCV on the remote controller, press SETUP. ●● Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD) ●● If the component cannot be operated, select "Try Next Code" with the cursors and press ENTER to display another code. 2. With the cursors, select "7. Remote Controller" "Remote Mode" and press ENTER. 3. With the cursors, select the REMOTE MODE button for which you want to register a remote control code and press ENTER to display the subcategory selection screen. 4. With the cursors, select the target subcategory, and then press ENTER to display the brand name input screen. 5. Select a character with the cursors and press ENTER. Repeat it to enter the first three characters of the brand name. 6. Select "OK" with the cursors and press ENTER. ●● After a search is done, the list of possible brand names is displayed. If the brand name list is not displayed, select "Not Listed" with the cursors and press ENTER to return to the brand name input screen in step 5. 7. With the cursors, select the target brand name, and then press ENTER. ●● When the brand name is specified, the remote control code of the brand and how to register it will be displayed on the TV screen. 8. Follow the guidance displayed on the TV screen. 9. If the component can successfully be operated with its registered remote control code, select "OK" with the cursors and press ENTER. ●● Only TV remote control codes can be entered for TV. Consulting the Remote Control Code List Find the remote control code in the remote control code list. 1. Look up the Remote Control Codes at the back of the manual for the corresponding remote control code. ●● The codes in the Remote Control Code List are those known as of the date of publication and may be changed. ●● The following REMOTE MODE buttons are preprogrammed with remote control codes. BD/DVD: Onkyo Blu-ray Disc/DVD player CD: Onkyo CD player STRM BOX: Apple TV ●● Only TV remote control codes can be entered for TV. ●● Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD) 2. Press and hold DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to program the remote control code. ●● The remote indicator lights in the input mode. 3. With the number buttons, enter the 5-digit remote control code within 30 seconds. ●● Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again. En-55