Onkyo TX-RZ800 User Manual - Page 75
En-39
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Crossover Allows you to change speaker configurations, such as crossover frequency. Settings are automatically configured if you use the Automatic Speaker Setup. Audio will not be output while you are making this setting. ●● If you are using THX-certified speakers, we recommend the following settings: - Set a value "80Hz(THX)" in Crossover frequency. - Set a value "80Hz" in "LPF of LFE". - Set a value "Off" in "Double Bass". Setting Item Front Center Height Default Value 80 Hz(THX) 80 Hz(THX) 80 Hz(THX) Setting Details Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Full Band" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● This cannot be selected when the setting for "Configuration" - "Bi-Amp" is "Yes". ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Advanced Settings (Setup Menu) Setting Item Surround Back LPF of LFE Subwoofer Phase Default Value 80 Hz(THX) 80 Hz(THX) 120Hz 0° Setting Details Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● This cannot be selected when the setting for "Configuration" - "Bi-Amp" is "Yes". ●● "Full Band" can be selected only when "Surround" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Set the low-pass filter for LFE (low-frequency effect) signals in order to pass lower frequency signals than the set value and thus cancel unwanted noises. The low-pass filter will be effective only on sources with LFE channel. The value from "80Hz" to "120Hz" can be set. "Off": Do not use this function Bass sound of the subwoofers may be insufficient depending on the type of sound and the listening position. In that case, change the phase of subwoofers. Set the phase value while listening to the sound so that you can obtain your preferred bass sound. "0°": The subwoofer is in normal phase. "180°": The subwoofer is in reverse phase. ●● The setting cannot be changed if "Configuration" - "Subwoofer" is set to "No". En-39