Onkyo TX-RZ800 User Manual - Page 77
Level Calibration, En-41
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
●● Default values vary depending on the regions. ●● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" - "Speaker Channels" / "Subwoofer". Level Calibration Adjust the level of each speaker with the built-in test tone. Settings are automatically configured if you use the Automatic Speaker Setup. Setting Item Front Left Center Front Right Height Left Height Right Default Value 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. ●● This cannot be selected in the following conditions. - The setting for "Configuration" - "Bi-Amp" is "Yes" - "Configuration" - "Powered Zone 2" is set to "Yes" and ZONE 2 is on Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. ●● This cannot be selected in the following conditions. - The setting for "Configuration" - "Bi-Amp" is "Yes" - "Configuration" - "Powered Zone 2" is set to "Yes" and ZONE 2 is on Advanced Settings (Setup Menu) Setting Item Surround Right Back Right Back Left Surround Left Subwoofer Default Value 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. ●● This cannot be selected in the following conditions. - The setting for "Configuration" - "Bi-Amp" is "Yes" - "Configuration" - "Powered Zone 2" is set to "Yes" and ZONE 2 is on Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. ●● This cannot be selected in the following conditions. - The setting for "Configuration" - "Bi-Amp" is "Yes" - "Configuration" - "Powered Zone 2" is set to "Yes" and ZONE 2 is on Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-15.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. ●● The speaker "Level Calibration" may be unable to be changed depending on the settings in "Configuration" - "Speaker Channels" / "Subwoofer". ●● "Level Calibration" cannot be changed while muting is on. En-41