Onkyo TX-RZ800 User Manual - Page 79
En-43, Setting item, Default Value, Setting Details, THX Loudness Plus
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
THX Audio Setting item Back Speaker Spacing THX Ultra2/ Select2 Subwoofer BGC Default Value >4.0 ft / >1.2 m No Off Setting Details Select the distance between the back speakers from the following values. When "Distance" - "Unit" is set to "feet".: Select a value from "4.0 ft". When "Distance" - "Unit" is set to "meters".: Select a value from "1.2 m". ●● This cannot be selected in the following conditions. - The setting for "Configuration" - "Bi-Amp" is "Yes" - "Configuration" - "Powered Zone 2" is set to "Yes" and ZONE 2 is on ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Set "Yes" or "No" of the connection of the THX certified subwoofer. "Yes": When a THX-certified subwoofer is connected "No": When a THX-certified subwoofer is not connected ●● The setting cannot be changed if "Configuration" - "Subwoofer" is set to "No". If your listening room layout (for practical or aesthetic reasons) locates most of the listeners close to the rear wall, the resulting bass level can be sufficiently reinforced by the boundary that the overall sound becomes "boomy". THX Select2 Plus receivers contain a Boundary Gain Compensation (BGC) feature to improve bass balance. "On": Use this function "Off": Do not use this function ●● In the following cases, the setting cannot be changed: - "Configulation" - "Subwoofer" is set to "No". - "THX Ultra2/Select2 Subwoofer" is set to "No". Setting item Loudness Plus Default Value On Advanced Settings (Setup Menu) Setting Details When the setting is set to "On", it is possible to enjoy even subtle nuances of audio expression at low volume. This is only available when the THX listening mode is selected. THX Loudness Plus THX Loudness Plus is a new volume control technology featured in THX Ultra2 Plus™ and THX Select2 Plus™ Certified receivers. With THX Loudness Plus, home theater audiences can now experience the rich details in a surround mix at any volume level. A consequence of turning the volume below Reference Level is that certain sound elements can be lost or perceived differently by the listener. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume is reduced by intelligently adjusting ambient surround channel levels and frequency response. This enables users experience the true impact of soundtracks regardless of the volume setting. THX Loudness Plus is automatically applied when listening in any THX listening mode. The new THX Cinema, THX Music, and THX Games modes are tailored to apply the proper THX Loudness Plus settings for each type of content. En-43