Onkyo TX-RZ800 User Manual - Page 90
Remote Controller, 8. Miscellaneous, En-54
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
7. Remote Controller Setting Item Remote ID Remote Mode Default Value 1 - Setting Details Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Onkyo components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure. 1. While holding down RCV, press and hold SETUP for about 3 seconds until the remote indicator lights. 2. With the number buttons, press one of 1, 2, and 3. The remote indicator flashes twice. Input and register the remote controller code of other devices. ●● For registration of the remote control code, refer to the next section, "Operating Other Components with the Remote Controller". 8. Miscellaneous Advanced Settings (Setup Menu) Firmware Update Setting Item Update Notice Default Value Enable Version - Update via NET - Update via USB - Setting Details Availability of a firmware update will be notified via network. "Enable": Notify updates "Disable": Do not notify updates The current firmware version will be displayed. Press ENTER to select when you want to update the firmware via network. ●● You will not be able to select this setting if you do not have Internet access or there is nothing to update. Press ENTER to select when you want to update the firmware via USB. ●● You will not be able to select this setting if a USB storage device is not connected or there is nothing to update in the USB storage device. ●● Wait for a while if "Firmware Update" cannot be selected. It will appear when the network function is started up. ●● Refer to the "Firmware Update" section for details about how to update the firmware. Initial Setup You can make the initial setup from the setup menu. ●● Wait for a while if "Initial Setup" cannot be selected. It will appear when the network function is started up. Lock Setting Item Setup Parameter Default Value Unlocked Setting Details Lock the Setup menu to protect the settings. "Locked": The menu is locked. "Unlocked": The menu is unlocked. En-54