Onkyo TX-RZ800 User Manual - Page 84
Hardware, En-48
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
6. Hardware Tuner Setting Item Default Value AM/FM Frequency 10kHz/0.2MHz Step (North American models) AM Frequency Step (European, Australian and Asian models) 9kHz Setting Details Select a frequency step depending on your area of residence. Select "10kHz/0.2MHz" or "9kHz/0.05MHz". ●● When this setting is changed, all radio presets are deleted. Select a frequency step depending on your area of residence. Select "10kHz" or "9kHz". ●● When this setting is changed, all radio presets are deleted. HDMI Setting Item HDMI CEC (RIHD) Control TV Default Value Off MAIN Advanced Settings (Setup Menu) Setting Details Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device. "On": Use this function "Off": Do not use this function When changing this setting, turn off and then on again the power of all connected components. ●● Depending on the TV set, a link may need to be configured on the TV. ●● When this setting is "On", the names of the CEC-compatible components and "CEC On" are displayed after this operation screen is closed. ●● Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. ●● If you operate the MASTER VOLUME control on the unit when this setting is "On" and audio is output from the TV speakers, audio will be output also from the speakers connected to the unit. If you want to output from only either of them, change the unit or TV settings, or reduce the volume of the unit. ●● If abnormal operation occurs when you set the setting to "On", set it to "Off". ●● When connecting a non-CEC compatible component, or when you are not sure whether it is compatible, set the setting to "Off". Set whether to enable the CEC link function for TVs connected through one of the HDMI OUT MAIN or SUB jacks. To change this setting, set "HDMI CEC (RIHD)" to "On" in advance. ●● When you have set "TV Out" - "HDMI Out" to "SUB" you cannot select "MAIN". En-48