Onkyo TX-RZ800 User Manual - Page 74
Speaker, En-38
View all Onkyo TX-RZ800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
2. Speaker Allows you to change the speaker configuration such as presence or not of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. Configuration You can change the number of speaker channels connected, the type of front speaker connection, the height speaker type, and other speaker settings. Setting Item Speaker Channels Subwoofer Height Speaker Bi-Amp Default Value 7.1 ch Yes Front High No Setting Details Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", or "7.1.2 ch" to suit the number of speaker channels connected. Set whether a subwoofer is connected or not. "Yes": When subwoofer is connected "No": When subwoofer is not connected Set the speaker type if height speakers are connected to the HEIGHT terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)" according to the connected speaker type and location. ●● If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Set whether your front speaker connection is biamp. "No": When front speakers are connected in a normal manner "Yes": When front speakers are bi-amp connected ●● If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Setting Item Powered Zone 2 Speaker Impedance Advanced Settings (Setup Menu) Default Value No 6ohms Setting Details Set the connection of speakers to Zone 2 speaker terminals. "Yes": When speakers are connected to ZONE 2 speaker terminals "No": When speakers are not connected to ZONE 2 speaker terminals ●● This item will be set to "No" when "Bi-Amp" is set to "Yes". Set the impedance of the connected speakers. "4ohms": When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance "6ohms": When the connected speakers all have 6 Ω or more impedance ●● For impedance, check the indications on the back of the speakers or their instruction manual. En-38