Panasonic AG-HMC70 Memory Card Camera Recorder - Page 77

Editing DPOF setting This is for writing the printing data on an SD card. You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1 Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the center of the cursor button. 2 Select the file to be set and then press the center of the cursor button. To complete the settings Press the MENU button. To cancel all DPOF settings Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [CANCEL ALL] and press the center of the cursor button. ≥When the confirmation message appears, select [YES], then press the center of the cursor button. ª What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. ≥The DPOF setting can be established for up to 999 prints. ≥DPOF setting made on other devices may not be recognized by this unit. Please perform the DPOF settings on this unit. ≥You cannot add the recording date to pictures to be printed with the DPOF settings. The number of prints set to be in DPOF is displayed. 3 Move the cursor button up or down to select the number of prints, then press the center of the cursor button. ≥You can select from 0 to 999. (The selected number of pictures can be printed with the printer supporting DPOF.) ≥To cancel the setting, set the number of prints to [0]. ≥You can also select multiple files in succession. 77