Panasonic AG-HMC70 Memory Card Camera Recorder - Page 87
Select the layout setting on, LAYOUT]., Select [PRINT], YES] and press
UPC - 092281893525
View all Panasonic AG-HMC70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
With other products 7 Select the layout setting on [PAGE LAYOUT]. [STANDARD]: Layout specific to the printer [ ]: No frame print [ ]: Frame print ≥You cannot set page layouts not supported on the printer. 8 Select [PRINT] # [YES] and press the center of the cursor button to print the pictures. ≥Exit PictBridge by disconnecting the USB cable (optional) after the pictures have been printed. When you stop printing halfway Move the cursor button down. A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 2. If [NO] is selected, all the settings are kept and the screen returns to step 3. ≥Avoid the following operations during printing. These operations disable proper printing. - Disconnecting the USB cable - Removing the SD card - Switching the mode dial - Turning off the power ≥Check the settings for the paper size, print quality etc. on the printer. ≥The edges of still pictures recorded on this unit with a 16:9 aspect ratio may be cut at printing. When using a printer with a trimming or borderless printing function, cancel this function before printing. (Refer to the operating instructions of the printer for details.) ≥You may not be able to print still pictures recorded with other products. ≥When the unit is connected directly to the printer, the DPOF settings cannot be used. ≥Connect the printer directly to this unit. Do not use a USB hub. ≥Use a USB cable with a USB logo mark, whose length is 1 m or less. 87