Panasonic CF-19CHGACJM Reference Manual - Page 119
Regarding the PC-Diagnostic Utility, Running the Diagnostic Check, Connect the AC adaptor
UPC - 092281871011
View all Panasonic CF-19CHGACJM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Hardware Diagnostics 119 When the video diagnostic check is running, the display may be distorted, and when the audio diagnostic check is running, sounds may be generated from the speaker. There are not malfunctions. Regarding the PC-Diagnostic Utility NOTE For the hard disk and memory only, you can select standard diagnostic check or extended diagnostic check. When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check. We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using the internal keyboard instead. Do not use the touchscreen or the dual touch. Operations Select icon Touch pad operations Place the cursor above the icon Click the icon Tap or click (right click cannot be used) Complete the PC-Diagnostics Util- Click (close) ity and then restart the computer Internal keyboard operations Press Space, and then press ( (close) cannot be selected) Press Space above the icon Press Ctrl + Alt + Del If the touch pad does not operate properly, press Ctrl + Alt + Del to restart the computer, or press the power switch to turn the power off, and then restart the PC-Diagnostic Utility. Running the Diagnostic Check Run this utility using the default settings in the Setup Utility. If the Setup Utility or other settings will not allow hardware to be executed, the hardware icon will be displayed in gray. You can also start the Diagnostic Check from [Diagnostic Utility] on the [Exit] menu of Setup Utility besides the following method. ( page 114) 1 Connect the AC adaptor, and turn on the wireless switch ( page 91). During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices. 2 Turn on or restart the computer, and press F2 or Del while [Panasonic] boot screen is dis- played. The Setup Utility starts up. If the password is requested, enter the Supervisor Password. If you are using the computer after changing the settings from the status at the time of purchase, we recommend that you make a note of the settings that are changed. 3 Press F9. At the confirmation message, select [Yes] and press Enter.