Panasonic CF-19CHGACJM Reference Manual - Page 89
Enabling the Power On by LAN function
UPC - 092281871011
View all Panasonic CF-19CHGACJM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
LAN 89 Enabling the Power On by LAN function The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN port. 1 Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility ( page 110). 2 In [Caution], press Enter. 3 Press F10, and then select [Yes] and press Enter. 4 Log on to Windows as an administrator. 5 Click (Start) - [Computer] - [System properties] - [Device Manager], and double-click [Network adapters] - [Intel(R) 82577LM Gigabit Network Connection], and then click [Advanced]. Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] [Device Manager] - [Network adapters] and double-click [Intel(R) 82577LM Gigabit Network Connection], and then click [Advanced]. 6 Click [Enable PME] in [Property] and select [Enabled] in [Value], and then click [OK]. NOTE The computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make the setting by the following steps. A Click (Start) - [Computer] - [System properties] - [Device Manager]. A standard user needs to enter an administrator password. Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] [Network adapters]. B Double-click [Network adapters] - [Intel(R) 82577LM Gigabit Network Connection], and click [Advanced]. C Click [Wake on Settings] in [Property] and select [Wake on Magic Packet] in [Value], and then click [OK]. If you forcibly shut down Windows, the Power On by LAN function will not work.