Ricoh Aficio MP C3500 Network Guide - Page 116
Name registration success. WINS Serv, ERY|NDS|BINDERY>
View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Monitoring and Configuring the Printer 2 108 Message Problem and solutions Login to fileserver (,) (In the print server mode) Login to the file server is in the NDS or BINDERY mode. Memory allocate error. Data cannot be obtained. Disconnect the USB cable, and then connect it. Name registration success. WINS Server= NetBIOS Name= Name registration of to was successful. Name registration success in Broadcast name= Name registration by Broadcast name of was successful. Name registration failed. name= Name registration of failed. Change to different NetBIOS name. nbtd start. The nbtd service has started. nprinter start (Netware) (In the remote printer mode) The NetWare service has started. nwstart start. (NetWare) The service for NetWare protocol stack setting has started. Open log file (In the print server mode)The specified log file has been opened. phy release file open failed. Replacing the network interface board is required. Contact your sales or service representative. Print queue cannot be serviced by printer 0, (In the print server mode) The print queue cannot be established. Make sure that print queue exists on the specified file server. Print server has no printer. (In the print server mode) The printer is not assigned to the print server. Using NWadmin, assign the printer, and then restart it. print session full No more print jobs can be accepted. Printer has no queue (In the print server mode) The print queue is not assigned to the printer. Using NWadmin, assign the print queue to the printer, and then restart it. pserver start. (NetWare) (In the print server mode) The NetWare service has started. Required file server () not The required file server is not found. found received EAP Failure EAP reception failed. restarted. The lpd service has started. sap enable, saptype=, sapname= The SAP function has started.The SAP packet is issued to advertise the service on the SAP table on the NetWare server. server identity invalid The server ID is disabled. Check the server authentication.