Ricoh Aficio MP C3500 Network Guide - Page 89

wiconfig, View settings, View IEEE 802.11b settings, Configuration

Get Ricoh Aficio MP C3500 PDF manuals and user guides View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

wiconfig Use the "wiconfig" command to make settings for IEEE 802.11b. ❖ View settings msh> wiconfig ❖ View IEEE 802.11b settings msh> wiconfig cardinfo • If IEEE 802.11b is not working correctly, its information is not displayed. ❖ Configuration msh> wiconfig "parameter" Parameter mode [ap|adhoc|802.11adhoc] ssid "IDvalue" Value configured You can set the infrastructure mode(ap) , the 802.11 Adhoc mode (802.11adhoc), or the ad hoc mode (adhoc). The default is ad hoc mode. You can make settings for the SSID in the infrastructure mode. Usable characters are ASCII 0x200x7e (32 bytes). An SSID value is set automatically to the nearest access point if no setting is made. If no setting is made for the 802.11 ad hoc mode, the samevalue as for the infrastructure mode or an ASSID value is automatically set. The default is blank. Remote Maintenance by telnet Parameter Value configured channel frequency "channelno." You can enable or disable the WEP function. To enable the WEP function, specify [on]; to disable it, specify [off]. To start the WEP function, enter the 2 correct WEP key. The default is "11". key [ "key value" ] val [1|2|3|4] You can specify the WEP key when entering in hexadecimal. With a 64-bit WEP, you can use 10 digit hexadecimals. With a 128-bit WEP, you can use 26 digit hexadecimals. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key, the WEP specified by key phrase is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. Put "0x"on the front of WEP key. You can omit the numbers with "val". The key number is set to 1 when making these omissions. The default is blank. 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Remote Maintenance by telnet
81
2
wiconfig
Use the "wiconfig" command to make
settings for IEEE 802.11b.
❖
View settings
msh> wiconfig
❖
View IEEE 802.11b settings
msh> wiconfig cardinfo
•
If IEEE 802.11b is not working
correctly, its information is not
displayed.
❖
Configuration
msh> wiconfig “parameter”
Parameter
Value configured
mode [ap|ad-
hoc|802.11adhoc]
You can set the in-
frastructure
mode(ap) , the
802.11 Adhoc
mode
(802.11adhoc), or
the ad hoc mode
(adhoc).
The default is ad
hoc mode.
ssid “
IDvalue
”
You can make set-
tings for the SSID
in the infrastruc-
ture mode.
Usable characters
are ASCII 0x20-
0x7e (32 bytes).
An SSID value is
set automatically
to the nearest ac-
cess point if no set-
ting is made.
If no setting is
made for the
802.11 ad hoc
mode, the same-
value as for the in-
frastructure mode
or an ASSID value
is automatically
set. The default is
blank.
channel frequency
“
channelno.
”
You can enable or
disable the WEP
function. To enable
the WEP function,
specify [on]; to dis-
able it, specify [off].
To start the WEP
function, enter the
correct WEP key.
The default is “11”.
key [ “
key value
” ]
val [1|2|3|4]
You can specify
the WEP key when
entering in hexa-
decimal.
With a 64-bit WEP,
you can use 10 digit
hexadecimals.
With a 128-bit
WEP, you can use
26 digit hexadeci-
mals.
Up to four WEP
keys can be regis-
tered. Specify the
number to be reg-
istered with “val”.
When a WEP is
specified by key,
the WEP specified
by key phrase is
overwritten.
To use this func-
tion, set the same
key number and
WEP key for all
ports that transmit
data to each other.
Put “0x”on the
front of WEP key.
You can omit the
numbers with
“val”. The key
number is set to 1
when making
these omissions.
The default is
blank.
Parameter
Value configured