Ricoh Aficio MP C3500 Network Guide - Page 127

Using DHCP

Get Ricoh Aficio MP C3500 PDF manuals and user guides View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 127 highlights

Using DHCP Using DHCP You can use the printer in a DHCP environment. You can also register the printer NetBIOS name on a WINS server when it is running. If you connect an Ethernet interface and IEEE 1394 (IPv4 over 1394) interface simultaneously, pay attention to the following: ❖ When a static IPv4 address is set for both interfaces • IPv4 Address: If interface IPv4 addresses overlap, the Ethernet interface is selected. • Subnet Mask: If interface subnet masks overlap, the Ethernet interface is selected. • Gateway Address: The selected value is applied. Make the gateway address setting inside the subnet set in the interface. If a value is beyond the range of the subnet selected by the interface, the machine operates using "0.0.0.0". ❖ When obtaining addresses from the DHCP server • IP Address, Subnet Mask: you can configure addresses assigned by a DHCP server. If IP addresses overlap or the same subnet IP addresses are selected, the effective value is assigned only to the prioritized interface. Ethernet has default interface priority. • AutoNet: A temporary IPv4 address starting with 169.254 and not used on the network, is assigned to the prioritized interface. Default interface priority is IEEE 1394 (IPv4 over 1394). • Gateway Address, DNS Server Address, and Domain Name: You can configure the addresses assigned by DHCP to the prior- itized interface. If the gateway address is be- yond the range of the subnet se- lected for the interface, the machine operates using "0.0.0.0". Ethernet has default interface priority. 4 ❖ When there are static IP addresses and addresses assigned by DHCP • IPv4 Address and subnet mask: if a static IPv4 address is the same as an address assigned by DHCP, or the static subnet mask address and the subnet mask address assigned by DHCP overlap, the machine uses the static IPv4 address interface. The interface with the DHCP setting is set by default. • Gateway Address: operates using the address entered manually. If a static address is not selected, or is set to 0.0.0.0, the interface using the address assigned by DHCP is used. Note ❒ Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS server. ❒ Supported DHCP servers are Microsoft DHCP Server included with Windows 2000 Server, Windows Server 2003, and Windows NT 4.0, and the DHCP server included with NetWare and UNIX. 119

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Using DHCP
119
4
Using DHCP
You can use the printer in a DHCP en-
vironment. You can also register the
printer NetBIOS name on a WINS
server when it is running.
If you connect an Ethernet interface
and IEEE 1394 (IPv4 over 1394) inter-
face simultaneously, pay attention to
the following:
❖
When a static IPv4 address is set for
both interfaces
•
IPv4 Address: If interface IPv4
addresses overlap, the Ethernet
interface is selected.
•
Subnet Mask: If interface subnet
masks overlap, the Ethernet in-
terface is selected.
•
Gateway Address: The selected
value is applied. Make the gate-
way address setting inside the
subnet set in the interface. If a
value is beyond the range of the
subnet selected by the interface,
the machine operates using
"0.0.0.0".
❖
When obtaining addresses from the
DHCP server
•
IP Address, Subnet Mask: you
can configure addresses as-
signed by a DHCP server. If IP
addresses overlap or the same
subnet IP addresses are select-
ed, the effective value is as-
signed only to the prioritized
interface. Ethernet has default
interface priority.
•
AutoNet: A temporary IPv4 ad-
dress starting with 169.254 and
not used on the network, is as-
signed to the prioritized inter-
face.
Default interface priority is
IEEE 1394 (IPv4 over 1394).
•
Gateway Address, DNS Server
Address, and Domain Name:
You can configure the addresses
assigned by DHCP to the prior-
itized interface.
If the gateway address is be-
yond the range of the subnet se-
lected for the interface, the
machine operates using
"0.0.0.0".
Ethernet has default interface
priority.
❖
When there are static IP addresses
and addresses assigned by DHCP
•
IPv4 Address and subnet mask:
if a static IPv4 address is the
same as an address assigned by
DHCP, or the static subnet
mask address and the subnet
mask address assigned by
DHCP overlap, the machine
uses the static IPv4 address in-
terface. The interface with the
DHCP setting is set by default.
•
Gateway Address: operates using
the address entered manually.
If a static address is not selected,
or is set to 0.0.0.0, the interface
using the address assigned by
DHCP is used.
Note
❒
Printers that register the printer
NetBIOS name on a WINS server
must be configured for the WINS
server.
❒
Supported DHCP servers are Mi-
crosoft DHCP Server included
with Windows 2000 Server, Win-
dows Server 2003, and Windows
NT 4.0, and the DHCP server in-
cluded with NetWare and UNIX.