Ricoh Aficio MP C3500 Network Guide - Page 72
dhcp, tion display
View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Monitoring and Configuring the Printer dhcp Use the "dhcp" command to configure DHCP settings. ❖ View settings The following command displays 2 the current DHCP settings. msh> dhcp ❖ Configuration You can configure DHCP. msh> dhcp "interface_name" {on|off} • Click {on} to enable dhcp. Click {off} to disable DHCP. • If the DNS server address and domain name are obtained from DHCP, be sure to click {on}. • ip1394 can be specified only when the IEEE 1394 interface is installed. • wlan can be specified only when the IEEE 802.11 interface is installed. Interface name ether ip1394 wlan Interface configured Ethernet interface IEEE 1394 interface IEEE 802.11 interface ❖ Current interface priority configuration display msh> dhcp priority ❖ Interface priority configuration msh> dhcp priority "interface _name" • You can select which interface has DHCP parameter priority. • Priority settings are available when multiple interfaces are installed. 64 ❖ DNS server address selection msh> dhcp dnsaddr {dhcp | static} • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user. • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static". ❖ Domain name selection msh> dhcp domainname {dhcp | static} • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user. • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static". Reference p.119 "Using DHCP" p.65 "dns" p.67 "domainname"