Ricoh Aficio MP C3500 Network Guide - Page 76
ifconfig, IPv4 Configuration
View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Monitoring and Configuring the Printer • wlan can be specified only when the IEEE 802.11b interface is installed. • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name Interface configured Interface name Interface configured ether Ethernet interface ether Ethernet Interface 2 ip1394 wlan IEEE 1394 interface IEEE 802.11b interface ❖ Initializing the printer name for each interface msh>hostname "interface _name" clear name ip1394 wlan IEEE 1394 Interface IEEE 802.11b Interface The following explains how to configure an IPv4 address 192.168.15.16 on Ethernet interface. ifconfig msh> ifconfig ether 192.168. 15.16 Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address, default gateway address) for the printer. ❖ View settings msh> ifconfig ❖ IPv4 Configuration msh> ifconfig "interface _name" "parameter" "address" • If you did not enter an interface name, it is automatically set to the Ethernet interface. • ip1394 can be specified only when the IEEE 1394 interface is installed. ❖ IPv6 Configuration msh> ifconfig ether inet6 interface_name " "printer _name" The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on the Ethernet interface. msh> ifconfig ether inet6 2001:DB8::100 64 ❖ Netmask configuration msh> ifconfig "interface _name" netmask "address" The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface. msh> ifconfig ether netmask 255.255.255.0 ❖ Broadcast address configuration msh> ifconfig "interface _name" broadcast "address" 68