Ricoh P C600 User Guide - Page 72

2. Loading Paper Orientation Envelopes Paper trays 2-4 Bypass tray • Flaps: closed • Bottom side of envelopes: toward the right of the printer • Side to be printed: face up • Flaps: closed • Bottom side of envelopes: toward the right of the printer • Side to be printed: face up When loading envelopes, use both the control panel and the printer driver to select "Envelope" for the paper type and specify the thickness of the envelopes. For details, see "Printing on Envelopes", Operating Instructions. Recommended envelopes For details about recommended envelopes, contact your local dealer. The size of envelopes that you can load depends on the tray in which you load them. For details, see page 54 "Paper Size Specifications". • Load only one size and type of envelope at a time. • The duplex function cannot be used with envelopes. • Straighten any curls within 2 mm (0.1 inch) upward and 0 mm (0 inches) downward on the tray before loading. • The output quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print one or two envelopes to check the print quality. • When printing onto envelopes, the print speed is slower than usual. • Flatten out prints if they are creased or curled. • Check that the envelopes are not damp. • High temperature and high humidity conditions can reduce print quality and cause envelopes to become creased. • Depending on the environment, printing on envelopes may wrinkle them even if they are the recommended envelopes. • Certain types of envelopes might be output creased, dirtied, or misprinted. If you are printing a solid color on an envelope, lines may appear where the overlapped edges of the envelope make it thicker. 70