Ricoh P C600 User Guide - Page 96
Wireless LAN Interface
View all Ricoh P C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
3. Troubleshooting Problem Printing does not start. Printing does not start. Printing does not start. Cause Solution If the printer is using wireless LAN, failure to print might result from a weak wireless signal. Check the radio signal status of the wireless LAN in [Host Interface]. If the signal quality is not satisfactory, move the printer to a location where radio waves can pass or remove objects that might cause interference. You can check the signal status only when wireless LAN is used in infrastructure mode. For details about the radio signal status of the wireless LAN, see "Checking the signal", Operating Instructions. If the printer is using wireless LAN, when there is a microwave oven, mobile phone, industrial machine, scientific instrument, or medical instrument which uses the same frequency range near the device, radio waves may be interfering with the wireless LAN's communication. Turn off the microwave oven, mobile phone, industrial machine, scientific instrument, or medical instrument which uses the same frequency range and then try printing again. If printing is successful, move the device to a location where it does not interfere. If the printer is using wireless LAN, SSID settings may be incorrect. Check that the SSID is correctly set using the printer's display panel. For details about SSID Setting, see "Connecting to the Wireless LAN Interface", Operating Instructions. 94