Samsung HL-S5679W User Manual (ENGLISH) - Page 128

Using the D-Net Problem "Connection is failed. 1394 network speed is not compatible." message appears. Possible Solution This message appears when the connection speed of the connected device and the device selected from the Target List are different when copying data. ➔ Connect a low speed device between the two devices. (See figure) D-Net DTV S400 S400 GROUP DEVICE S200 GROUP DEVICE S100 GROUP DEVICE IEEE1394 cable IEEE1394 cable IEEE1394 cable "This device is occupied by another device." message appears. "Authentication is failed" message appears. "Recording is prevented." message appears. Although DV Camcorder is in the device list, no picture is displayed on the screen when the DV camcorder is selected. S200 DEVICE IEEE1394 cable S200 DEVICE IEEE1394 cable IEEE1394 cable S400 DEVICE D-Net DTV S400 IEEE1394 cable S400 DEVICE D-Net DTV S400 A 1394 device has a maximum connection speed which will be marked near the IEEE 1394 connector with an "S" number (i.e., S100,S200,S400). The higher the number, the faster the maximum connection speed. This TV has a maximum connection speed of S400. This message appears when you try to record a device, which is currently being recorded manually or by another device, through the TV. ➔ Stop the recording device and retry. Check that the connected device supports DTCP. This message appears when trying to copy protected content. Although a camcorder which supports the DV format appears in the device list, you cannot watch video from the camcorder even if you select the camcorder as an input source, because the TV supports the MPEG format only. English - 128 Continued...