Sanyo VDC-HD3300 VDC-HD3300 Manual - Page 17
Quick Operation Guide 2/10
UPC - 086483075087
View all Sanyo VDC-HD3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Follow the steps below to set up and connect the camera to your PC. You can use alarm video recording, bidirectional audio communications, and other standard features of the camera, in addition to normal live video monitoring. 1 Connect the power cable to the power terminals. Use a 24-VAC or 12-VDC power supply. Do not turn on the camera until you complete all connections. 2 Connect the network (LAN) socket to your PC using a LAN cable. Check the operating environment of your PC and perform the following operations: Check the network information on your PC. Install the "H.264 Plug-in" from the supplied CD-ROM onto your PC. 3 Connect necessary external devices to the alarm input/output terminals. ALARM IN1/2 terminal: Connect an external switch, infrared sensor, or other device to detect alarm conditions such as entry of an intruder. ALARM OUT 1/2: Connect a buzzer, lamp, or other alarm device to output a signal to warn people of the occurrence of an alarm condition. 4 Connect a monitor for focus adjustment to the monitor output socket. Connect your monitor to the camera via the supplied video cable. 5 Turn on the camera. Live video appears on the monitor. Quick Operation Guide 2/10