Sanyo VDC-HD3300 VDC-HD3300 Manual - Page 37

The operation privileges of users who perform network operation are divided into 3 levels (admin, operator, and guest). Each user who attempts to access the camera will be authenticated by the user name and password at login and granted an appropriate operation privilege. Operation admin Monitor live video. ○ Switching between JPEG image and H.264 ○ video Selecting H.264 video stream protocol ○ Changing the user password ○ Configuring settings ○ ○ : Available △: Available (Excluding NETWORK SETTINGS) -: Unavailable Operation Privileges operator ○ ○ ○ ○ guest ○ - ○ - △ - Disabling authentication check at login You may set [ANONYMOUS USER LOG IN] to "ON" on the USER SETTINGS screen to allow anyone to access the camera without any authentication check at login. In this case, all login users are regarded as guest users. This means that users will be presented with an authentication check dialog box if they attempt to perform any operation beyond the guest user privilege and must enter an adequate user name and password to proceed. Login is permitted to the following 5 users. When you access the camera for the first time, log in as an admin user. Operation Privileges User admin admin admin2 admin3 operator operator guest guest Password (Default) admin admin2 admin3 operator guest Update your password periodically for security reasons. For details, refer to the "USER SETTINGS" section. Up to 20 users have access to one camera at a time. Before You Begin Network Operation 12/13