Sharp PN-T322B Service Manual - Page 19

Binding Cables, Setting The Usb Flash Drive, Cover

Get Sharp PN-T322B PDF manuals and user guides View all Sharp PN-T322B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING 1 - 3. BINDING CABLES The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamp to the back of the monitor, and fasten the cables. 1 - 4. SETTING THE USB FLASH DRIVE COVER 1 ) Insert the USB flash drive into the USB port. Cable Cable clamp USB port 2 ) Attach the USB flash drive cover and secure with the provided screw. Insert the claw 1 into the monitor, and while pressing in the direction of 2, insert the claw 3 into the monitor. Screw 3 (black) 3 USB flash drive cover 1 2 MEMO n If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 3-1/8 inch (80mm) (L) x 15/16 inch (25mm) (W) x 7/16 inch (12mm) (H). n To remove the USB flash drive cover, reverse the procedure. Using excessive force may break the claws. Exercise caution. CAUTION n The operation manual says, "When assembling/disassembling the USB memory cover, do not touch the screws except for the black ones." The user must be note this precaution. PN-T321/T322B INSTALLATION, ADJUSTMENT, SETTING 2 - 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
CHAPTER 2.
INSTALLATION, ADJUSTMENT, SETTING
PN-T321/T322B
INSTALLATION, ADJUSTMENT, SETTING
2 – 4
1 - 3.
BINDING CABLES
The cables connected to the terminals on the rear of the monitor can be
fastened with the cable clamp.
Attach the cable clamp to the back of the monitor, and fasten the
cables.
1 - 4.
SETTING THE USB FLASH DRIVE
COVER
1 )
Insert the USB flash drive into the USB port.
2 ) Attach the USB flash drive cover and secure with the provided
screw.
Insert the claw
1
into the monitor, and while pressing in the direc-
tion of
2
, insert the claw
3
into the monitor.
MEMO
n
If the USB flash drive will be attached, use a USB flash drive with
dimensions no greater than 3-1/8 inch (80mm) (L) x 15/16 inch
(25mm) (W) x 7/16 inch (12mm) (H).
n
To remove the USB flash drive cover, reverse the procedure.
Using excessive force may break the claws. Exercise caution.
CAUTION
n
The operation manual says, “When assembling/disassembling
the USB memory cover, do not touch the screws except for the
black ones.” The user must be note this precaution.
Cable
Cable clamp
USB port
1
2
3
3
Screw
(black)
USB flash
drive cover