Sharp PN-T322B Service Manual - Page 48
Supplementary Descriptions, Setting The Printer Port I/o Address To 378
View all Sharp PN-T322B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CHAPTER 6. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES 2 - 3. SUPPLEMENTARY DESCRIPTIONS ■ SETTING THE PRINTER PORT I/O ADDRESS TO 378 1 ) Open the system of the control panel. 2 ) Open the hardware tag, and click the "Device manager" button. 3 ) Click "+" mark on the left of "Port (COM/LPT)" Check to confirm that there is "ECP printer port (LPT1)." 1 ) Open the system of the Control Panel. 2 ) Open the System and Maintenance, and click the Device Manager. 3 ) Click the [Continue] button in User Account Control Dialog. User Account Control Windows needs your permission to continue If you started this action, continue. Microsoft Management Console Microsoft Windows [Continue] [Cancel] 4 ) Click "+" mark on the left of "Port (COM/LPT)". Check to confirm that there is "ECP printer port (LPT1)." 4 ) Open the property of the printer port (LPT1), and open the resource tag. 5 ) Uncheck "Use automatic settings" and select "Current configuration." (If "I/O range" is already "0378 - 037F," there is no need to change.) 5 ) Open the property of the printer port (LPT1), and open the resource tag. 6 ) Uncheck "Use automatic settings" and select "Current configuration." (If "I/O range" is already "0378 - 037F," there is no need to change.) PN-T321/T322B FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES 6 - 4