Sony VPL CX85 Operating Instructions - Page 39
The Install Setting Menu
UPC - 027242644274
View all Sony VPL CX85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Adjustments and Settings Using the Menu The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. INSTALL SETTING Tilt... V Keystone: Auto Side Shot: 0 Image Flip: Off Background: Blue Test Pattern: Off Lamp Mode: Standard Lens Control: On Direct Power On: Off High Altitude Mode:Off Security Lock: Off Input-A Menu Items Tilt... Adjusts the position (height) of the projected picture. Pressing the f on the TILT adjustment key or M/, key on the Remote Commander, the more the projector tilts and the higher the position of the picture. Pressing the F on the TILT adjustment key or m/< key on the Remote Commander, the less the projector tilts and the lower the position of the picture. V Keystone Corrects the trapezoidal distortion caused by the projection angle. Select "Auto" for automatic correction, or "Manual" for manual correction using the < or , key. When the bottom of the trapezoid is longer than the top : Sets a lower value. When the top of the trapezoid is longer than the bottom : Sets a higher value. Note The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending on the room temperature or the screen angle. Side Shot Corrects the horizontal trapezoidal distortion of the picture using the < or , key on the Remote Commander. When the right side is longer than the left side ( ) Set to a higher value (+ direction). When the left side is longer than the right side ( ) Set to a lower value (- direction). Set the adjustment level to "0" if you want to adjust the picture more widely using "V Keystone" only. Note Even when projecting using "Side Shot", the four sides of a picture may sometimes not be parallel to the respective sides of a screen frame. Image Flip Flips the image on the screen horizontally and/or vertically. Off: The image does not flip. HV: Flips the image horizontally and vertically. H: Flips the image horizontally. V: Flips the image vertically. Background Select the background color of the screen when no signal is input to the projector. Select "Black" or "Blue". Normally, set to "Blue." Test Pattern The factory setting is "Off." When set to "On," a test pattern is displayed on the screen during the "Lens Zoom" adjustment, "Lens Focus," "Side Shot" or "V Keystone." If you do not want to display a test pattern, set to "Off". 39 The INSTALL SETTING Menu GB