Sony VPL CX85 Operating Instructions - Page 40

Lamp Mode Sets the lamp brightness in the projection. High: Illuminates the projected image brightly. Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the "High" setting. Direct Power On Set to "On" if you are using a circuit breaker to turn the power on/off the entire system. You can turn off the power just by unplugging the power cord without pressing the I/1 key. Lens Control When set to "Off," the LENS (FOCUS, ZOOM) key on the Remote Commander, and the FOCUS and ZOOM keys on the projector do not function. High Altitude Mode The factory setting is "Off." Set to "On" when the projector is used at an altitude of 1,500 m or higher. Security Lock Turns on the projector's security lock function. Off: Turns off the security lock function. On: Turns on the security lock function, which locks the projector once a password has been set. For details, see "Security Lock" on page 27. The INFORMATION Menu The INFORMATION menu displays the horizontal and vertical frequencies of the input signal and the used time of the lamp. I N F O R M AT I O N fH: fV: Lamp Timer: 48.47kHz 60.00Hz No.23 1024x768 0H Input A Memory number of an input signal Signal type Menu Items fH Displays the horizontal frequency of the input signal. The displayed value is approximate. fV Displays the vertical frequency of the input signal. The displayed value is approximate. Lamp Timer Indicates how long the lamp has been turned on. Note These only display on the screen. You cannot alter the display. GB 40 The INFORMATION Menu