Toshiba Satellite 3000-S304 User Guide - Page 48
Removing a memory module, Connecting a mouse, the USB ports.
View all Toshiba Satellite 3000-S304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 Getting Started Setting up your computer Removing a memory module 1 Follow steps 1 through 5 in "Installing additional memory (optional)" on page 45. 2 Gently push the memory locks outward until the memory module pops up. 3 Gently pull the memory module diagonally to pull it out of the slot. 4 Complete the procedure by following steps 9 through 11 in "Installing additional memory (optional)" on page 45. Connecting a mouse You may want to use a mouse instead of the TouchPad, the computer's built-in pointing device. To connect a USB mouse, plug the mouse cable into one of the USB ports. Connecting a printer Before connecting a printer, you need to know whether it uses a USB or a parallel interface. Check the printer's documentation. You also need a suitable printer cable, which may come with your printer. Otherwise, you can purchase one from a computer or electronics store. NOTE: If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable.