Yamaha MOXF8 Owner's Manual - Page 44
Creating a synthesizer part by, using Arpeggio, In the Song Play mode, select the same Song
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Quick Guide Punch In point Playback of the recording Track is turned off from this point, and your keyboard performance will be recorded to the Track. Punch Out point Recording ends at this point and normal playback of the recording Track starts. [SF1] COPYLOC button Press the [SF1] COPY LOC to assign the measure numbers registered to the Locations (Loc1 and Loc2) to the Punch In and Punch Out points. NOTE For instructions on using the Location settings, see the "Reference Manual" PDF document. 3 Press the [REC] button, followed by the [F1] SETUP button, then set the parameters as below. • "Type" = "replace" • "Quantize" = "off" • "RecTr" = "3" 4 Press the [F2] VOICE button, followed by the [CATEGORY SEARCH] button then select the Synthesizer Voice. Set the Main Category to "Synth Pad / Choir" then set the Sub Category to "Analog." Move the Cursor [>] button to call up the Voice List. From this list, select "PRE5 H04 Saw Pad" then press the [ENTER] button. HINT Rehearsing function while recording During Realtime Recording in the Song/Pattern mode, pressing the [REC] button will call up the "Rehearsal" mode. In this mode, the [REC] indicator will flash and playback will continue uninterrupted; however, no data will be recorded, letting you practice a part or try out various ideas (while listening to the other tracks) without actually recording. To return to the Record mode, press the [REC] button again-the [REC] indicator will light continuously. Recording Rehearsal mode (playback continues) 5 Press ARP [EDIT] or [F3] ARP ED [F3] MAIN, then set the Switch parameter to "on" and set the "VoiceWithARP" parameter to "off." With the "Switch" parameter "on," the Arpeggio of Track 3 can be played back. If the "VoiceWithARP" parameter is set to "on," selecting the Arpeggio Type will change the Voice from the one selected in step 4. This is why you should set the "VoiceWithARP" parameter to "off" here. Creating a synthesizer part by using Arpeggio Next, record Arpeggio playback via Realtime Recording to Track 3. 1 In the Song Play mode, select the same Song to which the Drum and Bass parts have already been recorded. 2 Press the ARP [ON/OFF] button so that its lamp lights. 6 Press [F2] TYPE [SF1] ARP1, then assign the Arpeggio Type to the [SF1] ARP1 button. On this display, set the parameters as below: • "Bank" = "Pre" • "Category" = "Seq" • "SubCategory" = "Genrl" • "Type" = "7483" If desired, assign different Arpeggio Types to the [SF2] - [SF6] buttons. 44 MOXF6/MOXF8 Owner's Manual