Yamaha MOXF8 Owner's Manual - Page 71
Installing Optional Hardware, FL512M/FL1024M, Configuration, Installation Procedure
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Appendix Installing Optional Hardware FL512M/FL1024M Configuration There are two types of the Flash Memory Expansion Module: FL512M Features a memory size of 512 MB. FL1024M Features a memory size of 1024 MB. Installation Procedure 1 Turn the power of the MOXF off, and disconnect the AC power cord. Also, make sure to disconnect the MOXF from any connected external devices. 2 Turn the MOXF upside down so that the keyboard faces down and you have direct access to the underside of the instrument. To protect the Knobs, Wheels and Sliders from damage, place the keyboard so the four corners are supported by something that provides sufficient support like magazines or cushions. Place supports at all four corners, taking care not to touch the Knobs, Wheels and Sliders. Rear side 3 Remove the cover from the bottom. With the rear panel of the MOXF facing you, remove the screws from the cover by using the Phillips screwdriver. After removing the screws, slide the cover away to remove it. Important Keep the removed screws in a safe place. They will be used when reattaching the cover to the instrument after installation. Rear side Bottom 4 Attach the FL1024M or FL512M to the slot. As shown below. Location for FL512M/ FL1024M Slot Female screws View of the keyboard from the bottom Attach the module to the slot via the following steps. 4-1 Insert the Module vertically in the slot and align the screws (on the Module) to the female screws respectively. Place supports at all four corners, taking care not to touch the Knobs, Wheels and Sliders. CAUTION • Since the instrument-particularly the MOXF8-is very heavy, this procedure should not be done alone, but by two or three people. Rear side FL512M/ FL1024M Slot Female screws 71 MOXF6/MOXF8 Owner's Manual