Yamaha RX V1700 MCXSP10 Manual - Page 100

p p p p CUSTOMIZING THIS UNIT (MANUAL SETUP) ■ Volume Trim C)VOLUME TRIM Use this feature to adjust the level of the signal input at each jack. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Choices: XM, TUNER, PHONO, CD, CD-R, MD/TAPE, DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2, V-AUX, DOCK, MULTI CH Control range: -6.0 to +6.0 dB Control step: 0.5 dB Initial setting: 0.0 dB C)VOLUME TRIM XM ;;;0.0dB TUNER ;;;0.0dB PHONO ;;;0.0dB CD ;;;0.0dB [ ]/[ ]:Up/Down [p]/[[]:Adjust y This parameter also affects the signals output at ZONE OUT jacks. ■ Decoder mode D)DECODER MODE Use to switch the input mode. You can designate the reassigned digital input jacks for specific audio signals (DTS, etc.). Choices: AUTO, DTS D)DECODER MODE . CD ;;;;AUTO DVD ;;;;AUTO DTV ;;;;AUTO CBL/SAT ;;;;AUTO [ ]/[ ]:Up/Down [p]/[[]:Adjust • Select "AUTO" if you want this unit to automatically detect input signal types and select the appropriate input mode. • Select "DTS" if you want this unit to select DTS as the input mode. p p ■ Multi channel input Setup E)MULTI CH SET Use to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks. If you input 8-channel signals from an external decoder, use this feature to select jacks for the additional front signals. E)MULTI CH SET . BGV;;;;;;;;;LAST INPUT CH;;;;;6CH [ ]/[ ]:Up/Down [p ]/[[]:Adjust BGV BGV Use this feature to select the video source played in the background of the sources input from the MULTI CH INPUT jacks. Choices: DVD, DTV, CBL/SAT, VCR, DVR/VCR 2, V-AUX, LAST, OFF • Select "LAST" to set this unit to automatically select the last selected video source as the background video source. • Select "OFF" to set this unit not to play the video source in the background. Input channels INPUT CH Use this setting to select the number of channels input from an external decoder. Choices: 6CH, 8CH • Select "6CH" if you input 6-channel signals. • Select "8CH" if you input 8-channel signals. Note If "ZONE2 AMP" is set to "[SP1]", "[SP2]" or "BOTH" (see page 100), no sound is output from the surround back speakers even if you select "8CH". In this case, select "6CH" and set the output setting of the external component to 6 channels. Front input FRONT E)MULTI CH SET BGV;;;;;;;;;LAST INPUT CH;;;;;8CH . FRONT;;;;;;;;DVD [ ]/[ ]:Up/Down [p ]/[[]:Adjust p p If you selected 8ch in "INPUT CH", you can select the analog jacks at which the front signals from an external decoder will be input. Choices: MD/TAPE, CD-R, CD, DVD, DTV, CBL/SAT, VCR1, DVR/VCR2, V-AUX Note "FRONT" parameter appears only when you set "INPUT CH" to "8CH". 96 En