Yamaha RX V1700 MCXSP10 Manual - Page 96
AEQUALIZER, LEVEL, CDYNAMIC RANGE, Low-frequency effect level - hp
UPC - 027108926186
View all Yamaha RX V1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
p p p p CUSTOMIZING THIS UNIT (MANUAL SETUP) Graphic equalizer GEQ Use to match the tonal quality of the center, surround L/R and surround back L/R, surround back, presence L/R speakers and the subwoofer with that of the front L/R speakers. You can adjust 7 frequency bands (63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz). Choices: -6.0 to +6.0 dB Control step: 0.5 dB A)EQUALIZER . CHANNEL;;FRONT L -______+ 63Hz ;;;;;; 0.0dB 160Hz ;;;;;; 0.0dB 400Hz ;;;;;; 0.0dB [ ]/[ ]:Up/Down [p]/[[]:Adjust y Press k / n to select a frequency band and l / h to adjust the selected frequency band. Note The "GEQ" parameter can be adjusted only when "GEQ" is selected in "SELECT". Test tone TEST TONE A)EQUALIZER CHANNEL;;FRONT L -______+ 16kHz ;;;;;; 0.0dB . TEST TONE;;;;OFF [ ]/[ ]:Up/Down [p]/[[]:Adjust Use this feature to make adjustments of "GEQ" while listening to a test tone. To select "TEST TONE", press n repeatedly in the graphic equalizer screen. Choices: OFF, ON • Select "OFF" to stop test tones and output the currently selected source component. • Select "ON" to output test tones from the selected speakers. p p ■ Low-frequency effect level B)LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Control range: -20 to 0 dB Control step: 1 dB B)LFE LEVEL . SPEAKER;;;;;;0dB HEADPHONE;;;;0dB [ ]/[ ]:Up/Down [p]/[[]:Adjust Speaker SPEAKER Adjusts the speaker LFE level. Headphone HEADPHONE Adjusts the headphone LFE level. Note Depending on the settings of "LFE/BASS OUT" (see page 87), some signals may not be output at the SUBWOOFER OUTPUT jack. ■ Dynamic range C)DYNAMIC RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding Dolby Digital and DTS signals. Choices: MIN, STD, MAX • Select "MIN" (minimum) if you regularly listen at low volume levels. • Select "STD" (standard) for general use. • Select "MAX" (maximum) to preserve the greatest amount of dynamic range. C)DYNAMIC RANGE . SP: MIN STD[MAX HP: MIN STD[MAX [ ]/[ ]:Up/Down [p]/[[]:Select p p Speaker SP Adjusts the speaker compression. Headphone HP Adjusts the headphone compression. 92 En