Yamaha RX V1700 MCXSP10 Manual - Page 29
Center Pre Out Jack, Front Pre Out Jacks, Surround Back/presence Pre Out, Jacks - no bass through sub
UPC - 027108926186
View all Yamaha RX V1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
■ Connecting an external amplifier This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Notes • When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals. • The signals output at the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings (see page 50). • Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals. • Adjust the volume level of the subwoofer with the control on the subwoofer (see page 51). • Some signals may not be output at the SUBWOOFER PRE OUT jack depending on the settings for "SPEAKER SET" (see page 87) and "LFE/BASS OUT" (see page 87). 1234 CENTER FRONT SURROUND SINGLE(SB) L R SUB WOOFER 5 PRE OUT SUR.BACK/ PRESENCE 1 CENTER PRE OUT jack Center channel output jack. 2 FRONT PRE OUT jacks Front channel output jacks. 3 SURROUND PRE OUT jacks Surround channel output jacks. 4 SURROUND BACK/PRESENCE PRE OUT jacks Surround back or presence channel output jacks. When you only connect one external amplifier for the surround back channel, connect it to the SINGLE (SB) jack. y • Set the "SB L/R SP" to "LRGx2", "LRGx1", "SMLx2" or "SMLx1" and "PRESENCE SP" to "NONE" (see page 89) to output the surround back channel signals at SURROUND BACK/PRESENCE PRE OUT jacks. • Set the "PRESENCE SP" to "YES" and "SB L/R SP" to "NONE" (see page 89) to output the presence channel signals at SURROUND BACK/PRESENCE PRE OUT jacks. 5 SUBWOOFER PRE OUT jack Connect a subwoofer with a built-in amplifier. CONNECTIONS 25 En PREPARATION