Yamaha RX V1700 MCXSP10 Manual - Page 87

■ Selecting decoders for multi-channel sources If you connected surround back speakers, use this feature to enjoy 6.1/7.1-channel playback for multi-channel sources using the Dolby Pro Logic IIx, Dolby Digital EX or DTS-ES decoders. 1 Set the operation mode selector to AMP and then press EXTD SUR. on the remote control repeatedly to switch between 5.1 and 6.1/7.1channel playback. AMP SOURCE TV EXTD SUR. 8 2 Press l / h repeatedly to select a decoder while the name of the decoder is displayed. PRESET/CH A-E/CAT. ENTER Auto AUTO When a signal flag that can be recognized by this unit is input, this unit selects the optimum decoder to play back the signal in 6.1/7.1 channels. If this unit cannot recognize the flag or no flag is present in the input signal, it cannot automatically be played in 6.1/7.1 channels. ADVANCED SOUND CONFIGURATIONS Decoders You can select from the following decoders depending on the format of the source you are playing. Decoder Functions PLIIxMovie q D+PLIIx Movie DTS+PLIIx Movie MPCM+PLIIx Movie DSD+PLIIx Movie Plays back multi-channel sources in 7.1 channels using the Pro Logic IIx movie decoder. PLIIxMusic q D+PLIIx Music DTS+PLIIx Music MPCM+PLIIx Music DSD+PLIIx Music Plays back multi-channel sources in 6.1/7.1 channels using the Pro Logic IIx music decoder. DTS ES DTS 96/24 ES DOLBY D EX DTS+DOLBY EX MPCM+DOLBY EX DSD+DOLBY EX Plays back DTS signals in 6.1/ 7.1 channels using the DTS-ES decoder. Plays back multi-channel sources in 6.1/7.1 channels using the Dolby Digital EX decoder. Off OFF Decoders are not used to create 6.1/7.1 channels. Notes • "PLIIx Movie" is available only when "SB L/R SP" (see page 89) is set to "SMLx2" or "LRGx2". • Some 6.1/7.1-channel compatible discs do not have a signal flag that can be automatically detected by this unit. When playing these kinds of discs in 6.1/7.1 channels, select a decoder manually from "PLIIx Music", "EX/ES" or "EX". • 6.1/7.1-channel playback is not possible even if you press EXTD SUR. in the following cases: - when "SUR. L/R SP" (see page 88) or "SB L/R SP" (see page 89) is set to "NONE". - when the component connected to the MULTI CH INPUT jacks is being played. - when the source being played does not contain surround left and right channel signals. - when a Dolby Digital KARAOKE source is being played. - when the "2ch Stereo" (see page 51) or Pure Direct (see page 50) mode is selected. • When this unit is turned off, this setting will be reset to "AUTO". • The Pro Logic IIx decoder is not available when "SUR. B L/R SP" is set to "NONE" (see page 89). ADVANCED OPERATION 83 En