Yamaha RX V1700 MCXSP10 Manual - Page 84
Selecting decoders, Selecting decoders for 2-channel, sources surround decode mode
UPC - 027108926186
View all Yamaha RX V1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
ADVANCED SOUND CONFIGURATIONS Sound field parameter DIALG.LIFT 2ch Stereo DIRECT 7ch Stereo CT LEVEL SL LEVEL SR LEVEL SB LEVEL PL LEVEL PR LEVEL Features Dialog lift. Adjusts the height of the front and center channel sounds by assigning some of the front and center channel elements to the presence speakers. The larger the parameter, the higher the position of the front and center channel sound. Choices: 0, 1, 2, 3, 4, 5 2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. Choices: AUTO, OFF y • Select "AUTO" to bypass the decoders, DSP processors and the tone control circuitry only when "BASS" and "TREBLE" are set to 0 dB (see page 50). • Select "OFF" not to bypass the decoders, DSP processors and the tone control circuitry when "BASS" and "TREBLE" are set to 0 dB. • When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers. • The low-frequency signals input from the front left and right speakers are redirected to the subwoofer in the following cases: - "LFE/BASS OUT" is set to "BOTH" (see page 87). - "FRONT SP" is set to "SMALL" (see page 88) and "LFE/BASS OUT" is set to "SWFR" (see page 87). 7-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the volume level of each channel in the 7-channel stereo mode. Control range: 0 to 100% Selecting decoders ■ Selecting decoders for 2-channel sources (surround decode mode) Use this feature to play back sources with selected decoders. You can play back 2-channel sources on multichannels. 1 Set the operation mode selector to AMP and then press SUR. DECODE on the remote control to select the surround decode mode. AMP SOURCE TV SUR. DECODE 6 2 Press SELECT on the remote control repeatedly to select the desired decoder. You can select from the following modes depending on the type of source you are playing and your personal preference. SELECT 7 y • You can select the desired decoder by pressing SELECT and then press l / h repeatedly on the remote control. • You can change the decoder parameter settings. Press PARAMETER and then k / n repeatedly on the remote control to select the desired decoder parameter. You can change the value of the selected parameter by pressing l / h repeatedly on the remote control. 80 En