Yamaha YSP 4000 Owner's Manual - Page 136

YSP-4000 QUICK REFERENCE GUIDE Items used for connections and operations in this guide s Audio pin cable (x1) s OSD* video pin cable (x1) s Optical cable (x1) s Coaxial cable (x1) s AC power supply cable (x1) s IntelliBeam microphone (x1) s Cardboard microphone stand (x1) s Demonstration DVD (x1) *OSD: On-Screen Display This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual. 1 Installing this unit Decide where to install this unit. Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. Install this unit in the exact center of the wall when it is measured from the left and right corners. Install this unit in the corner at a 40˚ to 50˚ angle from the adjacent walls. An object, such as furniture Front left channel Center channel Front right channel Surround left channel Surround right channel An object, such as furniture 40˚ to 50˚ Front left channel Center channel Front right channel Surround left channel Surround right channel Install this unit using a rack, etc. Depending on your installation environment, connections with external components (see "2 Connecting external components to this unit") can be done before installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first. In case you install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit. For further information on installation, see page 17 in the Owner's Manual. The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of cloth on the floor in step 2. 1 Place this unit in front of 2 Place this unit upside 3 Install this unit in the 4 Installation is completed. the rack. down and connect this unit rack. to your TV and DVD player. y Hint • To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor. • You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions supplied with the metal wall bracket. Note Be careful not to leave scratches on this unit or the rack. Printed in Malaysia WK94420 [En] 2 Connecting external components to this unit Connecting external components such as a TV or DVD player to this unit. Connect your TV or DVD player to this unit using appropriate cables as shown below. After all connections are complete, plug the power supply cable into the AC wall outlet. For further information on connecting other components, see pages 20 to 31 in the Owner's Manual. Connection example 1 This connection example shows a way to connect external components such as a TV or DVD player to this unit by using the supplied cable. You can enjoy the multi-channel audio from the DVD player and the analog/digital audio from the TV. Use the video pin cable supplied with your DVD player to make a video connection between your DVD player and this unit. TV Optical digital output Analog audio output RL Video input 2 1 DVD player Coaxial digital output Video output 1. Pull out the cap 2. Check the direction Pull out the cap before connecting the optical cable, and then check the direction to insert the cable. Video connection Subwoofer 2 * The rear panel illustration shows jacks and their names to help you find them easily. They are not exactly the same as the ones on the actual rear panel of this unit. COMPONENT VIDEO OUT 1 3 FM75 UNBAL. ANTENNA COMPONENT COMPONENT SUBWOOFER STB DVD/AUX 2 VIDEO IN AUX 1 TV/STB AUX 1 AUDIO IN DOCK 4 DVD AUX 2 COAXIAL OPTICAL TV/STB AUX 1 DIGITAL IN Audio connection YSP-4000 To the AC wall outlet Connect cables in the following order. Do not plug the power supply cable into an AC wall outlet until all connections are complete. 5 Supplied 1 Audio pin cable (Outputs TV analog audio sounds from this unit) 2 OSD video pin cable (Displays the DVD analog video and the YSP-4000 menu screen on the TV) 3 Optical cable (Outputs TV digital audio sounds from this unit) 4 Digital audio pin cable (Outputs DVD digital audio sounds from this unit) 5 AC power supply cable (Connects this unit to the AC wall outlet) y Hint Check whether the digital audio output of your TV and DVD player is turned on. If you have connected external components, follow the steps on the backside to start the Continued AUTO SETUP procedure. on the back Connection example 2 TV This connection example shows a way to make the most of the capability of this unit. You can enjoy DVD audio and video with higher quality via the HDMI cable. In case your TV does not have a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite tuner, cable TV tuner, or digital airwave tuner via the HDMI cable. For details, see "Connections using HDMI cables" on page 22 in the Owner's Manual. DVD player Digital satellite tuner/Cable TV tuner/ Digital airwave tuner HDMI INPUT 1 (Sold separately) * The rear panel illustration shows jacks and their names to help you find them easily. They are not exactly the same as the ones on the actual rear panel of this unit. HDMI OUTPUT HDMI connection 2 (Sold separately) This connection is not necessary if your TV has a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner. Use the optical cable supplied with this unit to make an audio connection between your TV and this unit. AUX1 For details, see "Connection example 1". DVD IN OUT HDMI YSP-4000 AL. ANTENNA COMPONENT SUBWOOFER DVD/AUX 2 VIDEO IN AUX 1 TV/STB AUX 1 AUDIO IN Subwoofer Audio connection Connect cables in the following order. Supplied 3 AC power supply cable (Connects this unit to the AC wall outlet) To the AC wall outlet 3 Do not plug the power supply cable into an AC wall outlet until all connections are complete. Sold separately 1 HDMI cable (Displays the DVD digital video and the YSP-4000 menu screen on the TV) 2 HDMI cable (Inputs DVD digital audio/video signals to this unit) y Hint If you connect this unit to an HDMI control-compatible TV (except some models) via HDMI, you can use the remote control supplied with your TV to turn on or off the power, select the audio output component, and adjust the volume level of this unit. Note Check whether the digital audio output of your TV and DVD player is turned on. If you have connected external components, follow the steps on the backside to start the Continued AUTO SETUP procedure. on the back C2007 All rights reserved.