Yamaha YSP 4000 Owner's Manual - Page 97

Selecting the input mode Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2. y We recommend setting the input mode to AUTO in most cases. AV TV DOCK DVD AUX1 AUX2 AUX3 TV INPUT1 MACRO STB TV PRESET/TUNE SEARCH MEMORY FM/XM CAT AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF SUR. DECODE 0 +10 ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) 1 Set the operation mode selector to YSP. TV/AV YSP 3 Press INPUTMODE repeatedly to toggle between input modes. INPUTMODE DVD AUTO DVD DTS When DVD is selected as the input source AUX1 AUTO AUX1 DTS AUX1 ANALOG When AUX1 is selected as the input source TV/STB AUTO TV/STB DTS TV/STB ANALOG When TV or STB is selected as the input source AUX2 AUTO AUX2 DTS When AUX2 is selected as the input source Note ANALOG is not available as the input mode of DVD and AUX2. 2 Press one of the input selector buttons to select the desired input source. DVD AUX1 AUX2 STB TV • AUTO Automatically selects audio input signals in the following priority order: 1) HDMI 2) Digital 3) Analog y Use this input mode in most cases. • DTS Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS. • ANALOG Selects only analog signals. Even when both digital and analog signals are input simultaneously, only analog signals are selected. y You can adjust the default input mode to be selected when the power of this unit is turned on by adjusting INPUT MODE in INPUT MENU (see page 85). ADVANCED OPERATION English 93 En