Yamaha YSP 4000 Owner's Manual - Page 93

■ OSD SET (OSD settings) Use to adjust the display position and to set the display time of the OSD. B)OSD SET . OSD SHIFT;;;;;;;;;;0 OSD DISPLAY TIME;;;ON p [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return p p p p p OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the - (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices: -5 to +5 Initial setting: 0 OSD DISPLAY TIME (OSD display time) (U.S.A., Canada, and Australia models only) Use to set the interval for which the OSD screen is displayed after an operation. Choices: ON, 10s, 30s • Select ON to show the OSD screen constantly. • Select 10s to turn off the OSD screen 10 seconds after an operation. • Select 30s to turn off the OSD screen 30 seconds after an operation. y The OSD display time setting is available for your iPod and XM Satellite Radio (U.S.A. and Canada models only). For details, see pages 4 and 10 in the Reference Guide. ■ UNIT SET (Unit settings) Use this to change the display unit of measurement. Choices: METERS (Australia, Europe, Asia, and Korea models), FEET (U.S.A. and Canada models) C)UNIT SET METERS FEET p [ ]/[ ]:Select [ENTER]:Return • Select METERS to enter distances in meters. • Select FEET to enter distances in feet. Note If you change this setting, the adjusted sound beam settings may change. MANUAL SETUP 89 En English ADVANCED OPERATION