Yamaha YSP 4000 Owner's Manual - Page 28

Connections Connecting a DVD player/recorder For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to the coaxial digital audio connection. For video connection, connect the video output jack of your DVD player/recorder to the DVD/AUX 2 VIDEO IN jack of this unit. If your DVD player/recorder has component video output jacks, connect the component video output jacks of your DVD player/recorder to the DVD/AUX 2 COMPONENT VIDEO IN jacks of this unit. Once the component video connection is made, you can enjoy images with better resolution. y To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 21). Notes • Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder. • If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see page 28). FM75 UNBAL. ANTENNA COMPONENT COMPONENT SUBWOOFER STB DVD/AUX 2 VIDEO IN AUX 1 TV/STB AUX 1 AUDIO IN Rear panel of this unit DVD AUX 2 COAXIAL OPTICAL TV/STB AUX 1 DIGITAL IN *1You can only make either a composite *1 or a component connection. *1 *2 *2For the DVD/ *2 VCR combo player/recorder connection Video output Component Video video output output R L Analog audio output Coaxial digital output Video signal to the TV Video Video pin cable Component video pin cable DVD player/recorder Audio Audio pin cable Digital audio pin cable 24 En