3Com 3C10200 NBX Installation Guide - Page 113
Initial System Configuration, System-wide Settings > IP Settings
View all 3Com 3C10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Using Auto Discover for Initial System Configuration 113 Table 24 Auto Discover Actions on NBX System Components (continued) Component 3Com Attendant Console pcXset Soft Telephone Auto Discover Action Finds and configures any installed 3Com Attendant Consoles. The first 100 existing telephones, except for the extension that is associated with the Attendant Console, are mapped to Attendant Console buttons. The lowest extension is automatically associated with the Attendant Console. Typically, you would wait until you have installed all your telephones before you enable Auto Discover Attendant Consoles. Enables the Auto Discover feature on installations of the pcXset PC Telephone Client when the following conditions are true: ■ The pcXset PC Soft Telephone program is running on the host PC. ■ The pcXset PC Soft Telephone host computer is connected to the network. ■ You have entered the proper license key into the NBX NetSet utility. Before you use the Auto Discover process to configure telephones and attendant consoles, you should review the procedures in Chapter 3, Telephones and Attendant Consoles. Initial System To use the Auto Discover feature for initial system configuration: Configuration 1 Log in to the NBX NetSet utility using the administrator username and password. 2 Click System-wide Settings > Enable Features System-wide. 3 Verify that the box labeled Extensions Start At is set to what you want, and then click Apply. For a 4-digit dial plan, extensions start by default at 1000. For a 3-digit dial plan, extensions start at 100. Do not specify a starting extension that begins with zero (0) as that will cause the Auto Discover process to fail. 4 Click System-wide Settings > Auto Discovery. 5 Select the check box for the device type you are configuring, and then click Apply. 3Com recommends that you Auto Discover one device type at a time. For detailed information about each field, click the Help button on the page. Auto Discover Usage Notes ■ If devices are on a different subnet from the NCP, you must enable IP on the NCP (System-wide Settings > IP Settings), and each device must have IP configuration information. You can use DHCP to configure the