3Com 3C10200 NBX Installation Guide - Page 210

210 APPENDIX A: SPECIFICATIONS Table 51 3C10164D-ST BRI-ST Digital Line Card Specifications (continued) Supports Trunk Side TE at S/T interface Supports Line Coding as pseudo-ternary Supports distance between NT and TE as 1000m Supports Voice/G3 FAX on either B1 or B2 Compliant with Telecom Italia NET3 (CTR3) compliant without splitting bearer channels Compliant with TBR 3 - Integrated Services Digital Network (ISDN); Attachment requirements for terminal equipment to connect to an ISDN using ISDN basic access, November 1995 NBX E1 and T1 Digital Line Cards The E1 and T1 Digital Line Cards enable you to connect an E1 or T1 line to an NBX system. Table 52 3C10165D E1 and 3C10116D T1 Digital Line Card Specifications Weight Connectors 397 gm (14 oz) One RJ-45 connector for 10BASE-T line One RJ-45 connector for T1/E1 line Environmental Serial port (CONSOLE) for diagnostic access Ambient temperature: 0 °C to 40 °C (32 °F to 104 °F) Humidity: 10% to 90% noncondensing Humidity: 10% to 90% relative humidity noncondensing, operational and storage Vibration and shock: EN 60068 (IEC 68) Altitude: 10,000 ft Operational; 30,000 ft Non-operational NBX Hub Card The NBX Hub Card has been replaced by the NBX Uplink Card. Table 53 3C10115 NBX Hub Card Specifications Weight Connectors Environmental 397 gm (14 oz) Eight RJ-45 connectors for 10BASE-T lines One BNC male connector for 10BASE2 coaxial line Ambient temperature: 0 °C to 40 °C (32 °F to 104 °F) Humidity: 5% to 85% noncondensing