3Com 3C10200 NBX Installation Guide - Page 30
flashes, Explanation, HAPTER, NTRODUCTION
View all 3Com 3C10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
30 CHAPTER 1: INTRODUCTION Explanation S1 Flash codes for disk problems: N/A ■ 2 flashes: No valid disk (system is halted). ■ 3 flashes: Two valid disks, but they are not paired (system is halted). ■ 4 flashes: Configuration problem (system is halted). ■ 5 flashes: Two disks present, but no mirroring license installed. System is running but the system is not using the second disk. Using disk 0 (zero) only N/A Using disk 1 only N/A Synchronizing - disk 0 is valid, disk 1 is becoming a N/A fully mirrored disk. LED 3 flash rate indicates progress. If LED 3 stops normal flashing and intermittently flashes twice, the mirroring process has failed. Synchronizing - disk 1 is valid, disk 0 is becoming a N/A fully mirrored disk. LED 2 flash rate indicates progress. If LED 2 stops normal flashing and intermittently flashes twice, the mirroring process has failed. LED 2 and LED 3 flash alternately: the two disks are N/A resynchronizing Synchronized N/A S2 S3 Flashing Flashing On Off Off On On Flashing Flashing On Flashing Flashing On On