3Com 3C10200 NBX Installation Guide - Page 38
Card Software Status, Network Call Processor
View all 3Com 3C10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 CHAPTER 1: INTRODUCTION Green - POST test completed successfully. ■ DCH - D channel status of an ISDN PRI connection Off - No T1 or T1 PRI line is attached or the card does not need a D channel, such as when the card is running T1-robbed-bit. Green - Card is configured for ISDN PRI operation and an active PRI connection has been established. Amber - The D channel has not yet been established. It can take several seconds after the card has completed its power up tests for the card to establish a connection with the PRI trunk. If the DCH light goes to amber after the connection has been established, it can mean that an active control channel connection through the PRI line has been lost. ■ DNLD - Download Flash - The card is downloading software from the NBX Network Call Processor. Green - The download is complete or the Power-On-Self-Test (POST) is running. Amber - The download was interrupted before it was completed. On a LAN, the download process runs quickly. If the download from NCP to digital line card must travel a routed network path, the download can take a few minutes. If the DNLD light remains amber, it can indicate a severely congested network or a hardware problem with the T1 card. ■ CALL - Call audio traffic Off - No audio traffic on the T1 link. Flashing - Audio traffic is present. ■ CARD - Card Software Status Green - The card has finished downloading software from the NCP and all software processes have started successfully. Amber - A problem with one or more of the software processes running on the card. The card automatically reboots itself if it detects a problem with any of its software processes. ■ DSP - Reserved for future use ■ NCP - Network Call Processor Amber - The card is trying to establish contact with an NCP.