3Com 3C10200 NBX Installation Guide - Page 173
Upgrading Software Versions 3.0.0.0 and Later, Licensing and Upgrades > Third party Drivers
View all 3Com 3C10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Upgrading Legacy Link Card Software 173 10 Disconnect the serial cable from the Gateway card. 11 Ensure that the Gateway card has completed its reboot (check indicator LEDs on the front panel). 12 Re-connect the RJ21 and external power connectors to the front of the Gateway card. Upgrading Software Follow these instructions if your Gateway is currently running 3.0.0.0 or a Versions 3.0.0.0 and later release. An NBX reboot is required. The Gateway card is updated at Later the next Gateway reboot (usually at the same time as the NBX reboot). Ensure that users are notified that the phones will be out of service during this period. The upload package is supplied as a set of files in a zipped folder. These may be installed anywhere convenient on your PC. 1 Unzip the zip into a new folder named according to the software release version (). Ensure you unzip with folders enabled, to preserve the file structure supplied. 2 Log in to the NBX NetSet utility using the administrator login ID and password. 3 Click Licensing and Upgrades > Third party Drivers, and then click Install. 4 Browse to the folder ...Full Loader\NBX and select the .taz file. Click Upgrade to upload the .taz file. When complete, NBX NetSet prompts you to reboot the NBX system. Installing the Software Using Auto-Upload The software on the Gateway card will automatically update at the next reboot if the software version on the NBX is a different version to that which is already on the Gateway flash load. The Gateway will reboot when the NBX reboots, or if manually reset. If an update is available on the NBX, the Gateway detects the new software, loads it into flash, and automatically reboots. The external power supply for the Gateway card must be connected, to ensure the Gateway reboots when the NBX does