3Com 3C10200 NBX Installation Guide - Page 114
Disabling the Auto Discover Feature, NBX Administrator's Guide
View all 3Com 3C10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
114 CHAPTER 2: INSTALLING SYSTEM HARDWARE COMPONENTS phones. The DHCP server must also be configured to provide the NCP IP address through option 184. Or you can program IP settings into each device using the dialpad. See the NBX Administrator's Guide for DHCP information and for telephone local programming instructions. ■ It takes a few moments for the Auto Discover process and the software download process to complete. The NCP initializes devices one at a time. If you have connected many new devices to the system at the same time, the Auto Discover process requires more time. ■ A fully initialized telephone displays its extension and the date and time. If there are no extensions available, the Auto Discover process fails, and the telephone's display panel continues to display the telephone's MAC address. ■ If you are adding devices that do not have a display panel, such as 3100 Entry Telephones, connect the devices one at a time and then refresh the Telephone Configuration > Telephones list after you connect a device to see the extension assigned to that device. ■ Do not specify an Auto Discovery starting extension that begins with zero (0) as that will cause the Auto Discover process to fail. ■ If you are installing a 3Com Attendant Console, connect it after you have discovered all of the telephones. The Auto Discover Attendant Consoles process maps all existing telephone extension to the Attendant Console. ■ If you are adding licensed devices to the system, the devices will not be discovered until you add the appropriate Group License to the system. For more information on Group Licensing, see "Device Licenses" on page 72. Disabling the Auto After you finish the Auto Discover process for the initial configuration, Discover Feature you can disable it so that the NCP does not continue to search for added devices. To disable the Auto Discover feature: 1 Log in to the NBX NetSet utility using the administrator username and password. 2 Click System-wide Settings > Auto Discovery. 3 Clear all Auto Discover check boxes. 4 Click Apply.