3Com 3C10200 NBX Installation Guide - Page 152
Verifying a BRI-ST Digital Line Card, Using the NBX NetSet Utility
View all 3Com 3C10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
152 CHAPTER 6: BRI-ST DIGITAL LINE CARD Verifying a BRI-ST Digital Line Card After you Auto Discover a BRI-ST Digital Line Card, you can verify that it was properly discovered by using the NBX NetSet utility, described next, or by viewing the card's status lights, which is described later. Using the NBX NetSet To verify that the BRI-ST card has been properly discovered: Utility 1 Log in to the NBX NetSet utility using the administrator username and password. 2 Click the Click PSTN Gateway Configuration > Digital Line Cards. 3 Examine the list of Digital Line Cards to find the BRI-ST board with the correct MAC address. The Type column should contain BRI and the Status column should contain Ready. 4 Click the MAC address for the card to open the Modify page. 5 In the Channel List, click each entry to view that channel's status and verify that the each channel has an extension number. 6 Verify that the Status column contains Ready for each channel. You can also use the status lights on the front of the card to verify that a BRI-ST Digital Line Card has been properly discovered. See page 43 for details about BRI-ST card status lights. You are now ready to configure the ISDN BRI-ST Digital Line Card. See Chapter 3, "Device Configuration," in the NBX Administrator's Guide.