3Com 3C780 User Guide - Page 100
Type the server's IP address.
![]() |
UPC - 662705029917
View all 3Com 3C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Setting Up the Hub 4-13 3. Set the TFTP server's IP address. Type: set boot server [Enter] This prompt appears: Enter server IP address in dot notation? 4. Type the server's IP address. For example, type: 123.44.55.66 [Enter] This confirmation appears: Boot parameters Method : TFTP Server : 123.44.55.66 Filename : 5. Set the image filename to be used. Type: set boot filename The file name prompt appears: Enter filename? 6. Type the name of the image file after the question mark. For example, type: newimage [Enter] This display appears, showing your entries: Boot parameters Method : LOCAL Server : 123.44.55.66 Filename : newimage Optionally, if connection to the TFTP server is through a gateway, you must enter the gateway address.
![](/manual_guide/products/3com-3c780-user-guide-1cbee3e/100.png)
4-13
Setting Up the Hub
3.
Set the TFTP server’s IP address.
Type:
set boot server [Enter]
This prompt appears:
Enter server IP address in dot notation?
4.
Type the server’s IP address.
For example,
type:
123.44.55.66 [Enter]
This confirmation appears:
Boot parameters
Method
: TFTP
Server
: 123.44.55.66
Filename
:
5.
Set the image filename to be used.
Type:
set boot filename
The file name prompt appears:
Enter filename?
6.
Type the name of the image file after the question mark.
For example,
type:
newimage [Enter]
This display appears, showing your entries:
Boot parameters
Method
: LOCAL
Server
: 123.44.55.66
Filename : newimage
Optionally, if connection to the TFTP server is through a gateway, you
must enter the gateway address.