3Com 3C780 User Guide - Page 50
Choose the appropriate key A, B, M, or S.
![]() |
UPC - 662705029917
View all 3Com 3C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2-10 Installing the Hub Use of media module keys is optional. They can be used to ensure that the correct cable is inserted into each fiber transceiver. Once a key is in place, you can only insert the cable connector specified by that key into the transceiver. However, if the cable connector is universally keyed, it will fit into any transceiver regardless of its inserted key. You should insert the keys into the transceivers before installing the fiber module. Insert one key into the top of each transceiver as described below and shown in Figure 2-5: 1. Determine the type of configuration that you want for the two attachment ports on the fiber module. Refer to the sections "Planning Connections" later in this chapter and "Port Connections" in Chapter 3 for help in determining your hub connection plan. 2. Choose the appropriate key (A, B, M, or S). The key types are identified by letters on the top of the key. 3. Insert the tabbed end of the key through the opening in the top of the transceiver receptacle, and fit it in place. Figure 2-5. Inserting a Type M Key into a Fiber Transceiver
![](/manual_guide/products/3com-3c780-user-guide-1cbee3e/50.png)